Putting a refrigerator in storage in Prineville Oregon can be difficult. You don’t want it in your home for other purposes, such as after a remodel or for other reasons. It’s important to have a safe place to store your refrigerator. A self-storage in Prineville Oregon is a safe way to store your fridge. It doesn’t get in the way or take up space in your garage. It’s also not exposed to the elements where heat, cold, or humidity could cause damage.
However, it’s more than just using a storage container. There are many other things to think about. Also, you need to ensure that your refrigerator is properly stored so it can work right the first time you use it. These are the things you should consider to ensure your fridge is safe and ready for self storage in Prineville OR.
How to Prepare a Fridge for Storage
The process remains the same regardless of whether you are unplugging your fridge for a few days or putting it in a storage unit to store it for a longer time. First, turn off the refrigerator and unplug. You will need to drain any water lines or ice makers from the refrigerator. You should not leave any liquids inside the fridge as they can cause mold and make it unsafe to use later.
The refrigerant that cools your fridge is not included in this price. It’s not necessary to do anything, and the fridge is sealed so you should not open it. You should allow enough time for the fridge to drain all water and the lines to dry out before you store it. This will give you peace of mind and help reduce any potential problems such as standing water, the icemaker, or other areas.
You might also consider defrosting your freezer in advance. This will save you time when you actually move the fridge. You might find that the freezer compartment doesn’t have enough time to fully freeze before you can move the fridge. This could cause delays in your plans or make it difficult to move the fridge if the freezer compartment isn’t fully defrosted. It could also cause standing water problems and damage the fridge.
Once the fridge is fully defrosted, drain it and dry it completely. It’s now ready to be cleaned. To ensure that there are no food particles, you need to thoroughly clean it. Mold, bugs and other problems can occur if there is food in the container. You should pay attention to the seals on your doors as they are a common area for food particles to get stuck. They can also go unnoticed.
Make sure to clean all drawers and trays, as well as the exterior of the unit. To reduce the risk of germs and bacteria, coils should be vacuumed or dusted. Make sure to clean any hidden compartments and components. Make sure that the refrigerator is unplugged if you are working in an area with electrical parts.
Tips to Defrost and Clean a Refrigerator
It will naturally defrost if you unplug the refrigerator. However, this can take a while so speed it up. Boiling water can be used to speed up the process. If the ice is not easily removed from the shelves and sides of the freezer, you can remove them. Do not pick at or scrape the fridge or freezer’s interior. This can cause damage and prevent it from functioning properly in the future.
It’s fine to not add hot water or make ice. The natural defrosting process may take longer. To absorb any water from the defrosting process, you can put towels or other cloth inside your fridge. If your refrigerator has an icemaker, make sure you remove all ice cubes from the fridge before you start. They will take longer to defrost and can create large puddles of water which may be difficult to absorb.
Once the defrosting has been completed, you can begin cleaning. You will need to remove all shelves and drawers from the fridge. It is much easier to clean them if they are not in the refrigerator. Warm water and liquid soap can be used to clean the shelves and drawers as well as the interior of the refrigerator. Avoid harsh chemicals and abrasive scrub pads, as they could cause damage to components.
Have your Fridge Ready to Transport to the Storage Unit
Remove the electric cord and tape the fridge to prepare it for transport. You should also take out all shelves and drawers, and transport them separately. It’s not a good idea to have anything in your refrigerator moving about while it’s being transported from one place or another. Cover the refrigerator with a blanket or other protective fabric and close the doors. Tape it down. You can then use a dolly or other tool to move your fridge from its current place to the storage unit. It can be left there until you need it again.
You should not tape the fridge up or seal it shut when you place it in the storage container. If you do this, it will begin to accumulate odors. You can leave the doors open partially or fully, and prop them up with something to ensure they don’t close by themselves. To help prevent odors from forming, you can place dryer sheets or freshly-ground coffee beans in the refrigerator and freezer.
Why the Right Storage Unit is Important
It is important to make sure that you are selecting the best self-storage in Prineville Oregon to meet your refrigerator-storing requirements. It should be large enough to allow the refrigerator’s doors to open. This will ensure that you are not concerned about extreme temperatures and humidity changes, which can cause damage to refrigerators. You should be more cautious about how long your refrigerator stays in storage. This will ensure that it works properly when you use it again.
What about a Non-Working Refrigerator?
You must dispose of a refrigerator that isn’t working properly. There are certain procedures to follow. You can use the guidelines provided by the EPA to help you recycle your old fridge in a proper manner. Many scrap metal recyclers will accept fridges. There may also be other organizations that could help. Depending on where you live, your options might be different.
You need to know the basics of fridge storage in Prineville Oregon. If you follow these steps correctly, your fridge will be in great condition for next time. You should also follow the EPA guidelines if you intend to dispose of a non working fridge. This will help protect the planet.
Greenbar Secure Storage has a wide range of storage units available in Prineville, for Bend, Madras, and Redmond. They offer a variety, including ground-level access, security cameras, 24/7 accessibility, and parking spaces. Locally owned and operated, we are the best choice for convenient and clean self-storage units. All of our commercial storage clients accept deliveries from businesses to make things as smooth as possible!
- Extra security and family-friendly
- Unbeatable onsite entrance tech
- Each unit is protected by a unique code
- Access your unit at your leisure
- Save money and have convenience when you most need it
We are proud of the many layers and security of control we have put into our secure storage units such as:
- High, heavy-duty fencing surrounds the storage facility at all locations including Redmond
- You can access your unit via electronic access using personalized codes.
- Timed access to individual units after entry and an automatic reset of security
- Galvanized steel walls are almost impossible to crack in storage units in Madras and our locations in Central Oregon.
- All hours of the day and night, well-lit areas in Bend and other Greenbar Secure Self Storage centers.
- A resident storage manager who lives on-site, carefully selected and screened and selected out of Prineville.